Factory direct Shenzhen, China · since 2012

Fiber optic assemblies,
built to your drawing

Quote in one working day · sample free, you cover freight · NDA on request

Pricing — Quote based on spec. Connector, length, fiber grade and volume set the unit cost, so we quote the configuration you send.

Our plant · Bao'an, Shenzhen Patch cord assembly line at the MingFiber factory in Shenzhen
LC uniboot duplex patch cord
Certified & tested
ISO 9001:2015 IEC 61753-1 IEC 61300-3-35 CE & RoHS 2.0 100% IL / RL tested
Best sellers

Patch cords that ship every week

The eight configurations our distributors reorder most — all built to your length and label.

All products
Best seller LC–LC Duplex OS2 Patch Cord
Fiber Patch Cord

LC–LC Duplex OS2 Patch Cord

Duplex LC–LC patch cord in G.657A2 single-mode with 2.0 mm LSZH jacket, IL ≤ 0.15 dB and a serial-numbered test report per…

MF-PC-LL-DX-OS2 View spec
SC–SC Duplex OS2 Patch Cord
Fiber Patch Cord

SC–SC Duplex OS2 Patch Cord

SC–SC duplex single-mode patch cord with push-pull latched connectors, 2.0 mm LSZH cable and low-loss UPC polish.

MF-PC-SS-DX-OS2 View spec
Data center LC–LC Duplex OM4 Patch Cord
Fiber Patch Cord

LC–LC Duplex OM4 Patch Cord

Laser-optimized OM4 LC–LC duplex patch cord in aqua LSZH, IL ≤ 0.15 dB at 850 nm for 10G/40G/100G trunks.

MF-PC-LL-DX-OM4 View spec
LC/APC Simplex OS2 Patch Cord
Fiber Patch Cord

LC/APC Simplex OS2 Patch Cord

Simplex LC/APC patch cord with 8° angled polish and ≥ 60 dB return loss, the standard drop lead for GPON and XGS-PON…

MF-PC-LA-SX-OS2 View spec
FC/APC Duplex OS2 Patch Cord
Fiber Patch Cord

FC/APC Duplex OS2 Patch Cord

Threaded FC/APC duplex patch cord for CATV headends and test racks, with a metal housing and ≥ 60 dB return loss.

MF-PC-FA-DX-OS2 View spec
FC/UPC Duplex OS2 Patch Cord
Fiber Patch Cord

FC/UPC Duplex OS2 Patch Cord

FC/UPC duplex single-mode patch cord for telecom ODFs and legacy transmission equipment, flat PC polish at 50 dB return loss.

MF-PC-FU-DX-OS2 View spec
SC–SC Duplex OM2 Patch Cord
Fiber Patch Cord

SC–SC Duplex OM2 Patch Cord

Orange OM2 SC–SC duplex patch cord for 1G/10G legacy multimode links in buildings and campus backbones.

MF-PC-SS-DX-OM2 View spec
High density LC Uniboot Duplex OS2 Patch Cord
Fiber Patch Cord

LC Uniboot Duplex OS2 Patch Cord

Two-fiber uniboot LC patch cord with a single 2.0 mm round cable and switchable polarity for high-density patching.

MF-PC-LU-DX-OS2 View spec
OEM / ODM

Your brand on the boot, your packing list in the carton

Most of what leaves our plant carries someone else's name. Send a drawing, a competitor part number or a sample, and we will build the equivalent — with your label, your artwork and your test report format.

  • Any connector mix — LC, SC, FC, ST, MPO
  • 0.3–300 m with ± 20 mm tolerance
  • Private label on boot, bag and carton
  • Your test report format and language
Technician splicing a fiber optic assembly at MingFiber
01

Custom lengths and connector mixes

Any combination of LC, SC, FC and ST ends, 0.3–300 m, simplex, duplex or breakout — built to the drawing you send.

02

Private label and print

Your logo on the boot, part number on the label, artwork on the inner box. We never print our own brand on OEM shipments.

03

Drawing review in 24 hours

Send PDF, DWG or STEP. An engineer confirms feasibility, tooling cost and lead time the next working day.

04

Samples before you commit

Stock configurations ship in 3–5 days free of charge. Custom samples take 5–7 days, and the tooling charge is credited on the first bulk order.

05

Test data with every batch

Insertion loss, return loss and end-face results per serial number, exported as PDF or CSV for your incoming inspection.

06

Packing that survives the trip

Individual bag and label, double-wall carton, desiccant, packing list inside. Reels crated or drummed for cable orders.

Send your drawing

PDF, DWG or a competitor part number — anything we can read.

Quote in 1 day

Price, tooling, lead time and a cross-reference if needed.

Approve the sample

Photo, dimensional report and IL/RL data before you sign off.

Production

7–12 working days, with a progress photo at first article.

Inspection & shipping

AQL 0.65, packing list, HS code, DHL / air / sea.

Quality control

Every assembly is measured, not sampled

  • Incoming inspection — fiber and ferrule lots checked against the reel label.
  • In-process geometry — 100% interferometric end-face check to IEC 61300-3-35.
  • 100% IL and RL — both directions recorded, serial number on the label.
  • Final inspection — AQL 0.65 on labeling, length, packing and carton drop.
Optical test laboratory at MingFiber
2Interferometers in the lab
0.65AQL on final inspection
12Test points per MPO trunk
3 yrsProduct warranty
Before you ask

Answers to the questions we get every day

What is the difference between a patch cord and a pigtail?

A patch cord has a connector at both ends and is used to patch between equipment ports. A pigtail has one connector and one bare fiber end; the bare end is fusion spliced onto a cable in an ODF or splice closure. We manufacture both, and pigtails can be cut to the exact tray length you specify.

Which fiber grade should I order — G.652D or G.657A2?

G.652D is the standard single-mode fiber for outside plant and long spans. G.657A2 is bend-insensitive and is the right choice for drop cable, patch cords and any indoor route with tight bends; it remains fully compatible with G.652D equipment. If your link budget is tight or the cable will be coiled inside a wall box, specify G.657A2.

What insertion loss and return loss can you guarantee?

Standard single-mode patch cords are measured at IL ≤ 0.20 dB and RL ≥ 50 dB (UPC) or ≥ 60 dB (APC). Our premium grade is IL ≤ 0.15 dB and RL ≥ 55 dB. Low-loss MPO trunks are IL ≤ 0.25 dB. Every assembly is measured, not sampled, and the value is recorded against the serial number on the label.

Can you supply OM5 or 62.5/125 µm multimode?

Yes. OM1, OM2, OM3, OM4 and OM5 are all available, in aqua, violet, orange or gray jacket. OM5 is normally specified for SWDM4 applications above 100G.

Do you provide test reports?

Yes — a per-batch IL/RL report is included free of charge. Per-cable serial numbers are printed on the label so the report can be matched to the assembly on site. Interferometric end-face reports and CSV exports are available on request.

Read all frequently asked questions

Get a quote in one working day

Tell us the product, quantity and destination. An engineer — not a chatbot — answers.

PDF, DWG, DXF, STEP, JPG or ZIP — up to 10 MB.

We reply within one working day, Monday to Saturday. Your drawing is treated as confidential and covered by an NDA on request.

Next step

Need a price for your specification?

Send the drawing, quantity and destination port. A sales engineer replies within one working day with price, lead time and packing details.

Chat on WhatsApp +86 159 1545 1535 · reply in ~1 h